It is a complete 2D and 3D drawing 软件 within Lantek Expert, with sufficient creation and editing tools to 设计 零件 from scratch, not just to 'fix a DXF'. You can draw common geometries (lines, polylines, arcs, circles, rectangles, polygons, slots, ellipses, etc.), transform them (copy, move, stretch, rotate, scale, symmetry) and build contours ready for 制造. The difference compared to a general CAD is not that it 'draws more', but that it does so with 切割 and 加工 in mind: from the 设计 itself, you can incorporate typical industry decisions and review the result before moving to 制造.

Yes. The 模块 includes a wide range of 2D drawing tools to create 几何图形 from scratch with precision, using a mouse or point input. Additionally, the 'point access' allows you to snap to exact references (end, middle, intersection, tangent, quadrant, center, projected, etc.), which is key for technical 零件 where millimeters matter. In practice, this allows the 模块 to function as an independent 零件 designer for many use cases in the industry, without the need for other 软件 for day-to-day tasks.

It is not limited to 几何图形. It includes Technology and 加工 menus within the Drawing 模块 itself, with specific functions for industrial 切割. For example, you can manage attacks (entries/exits) with automatic or semi-automatic insertion, define fixtures and nano-joints, generate loops in corners and 'kill edges', assign technologies such as clean 切割, marking, not 切割, dynamic 切割, and no partial 切割, or create auxiliary 几何图形 and mesh patterns. These are decisions that in a generic CAD often remain outside or require plugins and additional steps. Here, they are 零件 of the natural 设计 flow.

The 模块 supports automatic, semi-automatic, and manual lead-in strategies with multiple configurations. This helps improve cut quality and reduce defects such as burrs or marks.

The 模块 includes a specific section for Anchors to introduce micro-holdings, with options to delete, choose different types, configure parameters, and move the entry or exit point of the anchor. It also includes a nano-joint, which reduces power to leave an anchor-type holding without entry or exit, useful for preventing small 零件 from shifting or falling. You can even 'convert to 几何图形' certain micro-holdings to treat them as 几何图形 when needed. This is not a minor detail: in actual 切割, the stability of the piece defines quality, safety, and repeatability.

It includes Loops with automatic insertion in corners of closed geometries (depending on configuration), manual insertion of loop types, parameter configuration, and semi-automatic options for rounding edges in contours. It also includes 'edge killing', which introduces rounded angles at vertices. In 切割, corners are where many visible defects appear: overheating, marks, vibration, or imperfections. Being able to control loops and vertex treatment from the 设计 itself allows you to anticipate the problem instead of chasing it on the machine.

Yes. There are standard Chamfer tools to add, modify, invert 倒角, and assign variable 倒角 to complete contours, in addition to parameter configuration. There is also a 3D 倒角 section where you define the bottom face, connections between the upper and lower face contours, and how 加工 should respect those connections, supported by updating the 3D view during the definition. This is relevant when the chamfer is not 'decorative', but functional for welding, assembly, or edge preparation.

Users can define marking, no-cut zones, clean 切割, and other strategies directly in the 设计. This ensures that the 零件 includes 制造 intent from the beginning.

In 加工, you have options for automatic 加工, insertion of rapid movements, 切割 movements, and a powerful block of contours (manual and automatic), as well as actions like 加工 all marking, all 切割, or all 切割 of a certain quality. There are also cycles (linear, circular, irregular, grid) defined by points, distances, number of points, etc. And specific functions such as rapid 切割 in holes, manual hole destruction, automatic destruction (depending on the type of machine), and semi-automatic destruction with modes (grid, spiral, continuous). For many 零件, this reduces manual work and standardizes results.

The 模块 includes 零件 inspection (checking the 零件, detecting a 零件 to 'obtain' a clean 零件 from another and removing excess 几何图形), measurements (viewing 几何图形, distances and angles, angles by three points) and 加工 verification to ensure everything is machined, that there are no overlaps, and that attacks, micro-holds, or loops do not interfere with other elements. Additionally, you can simulate program instructions, move along the line position, advance and retreat, and 'process' the 仿真 including rapid movements and evacuation. In practical terms: you reduce surprises. 仿真 and verification are the filter before the error becomes cut metal.